Superabrasives Products
Overview
Quality Control From verification of vendor quality - to cleaning - to size verification - to coating - to finished product, WorldWide Superabrasives has our customer needs as priority #1.
Our factory verifies sizing through microscopic examination, Microtrac testing according to ANSI Standard B74.20 and electroformed testing to ANSI Standard B74.16.
We verify the integrity of all mesh materials by performing TI-HL and TTI-HL on every lot according to ANSI Standard B74.23. WWSA maintains compliance with federal and state environmental regulations with its waste water handling system.
 |
 |
 |
||
| Resin Bond Mesh
Resin Bond diamond is recommended for vitrified bond and resin bond (phenolic and polyimide) systems. |
Metal Bond Mesh
Our line of metal bond non-crystalline products is recommended for resin bond, vitrified bond, metal bond and electroplated bond systems where a more free cutting crystal is required. |
Cubic Boron Nitride
Cubic Boron Nitride (cBN) is second in hardness only to the diamond. cBN exhibits a high abrasion resistance and thermal conductivity when compared to conventional abrasives. |
||
 |
 |
 |
||
| Metal Bond Mesh (Crystalline)
Our WWS line of metal bond crystalline diamond products are widely used in resin bond, metal bond, vitreous bond and electroplated bond systems. |
Metal Bond Saw Grit (Crystalline)
Our WSG saw grit line of metal bond crystalline diamond products is specifically engineered to satisfy all stone applications and construction industries. |
Resin Bond Micron
The RB-M1’s ability to microfracture allows the crystal to continuously generate new cutting edges. |
||
 |
 |
|||
| Metal Bond Micron
A blocky shaped, tough metal bond micron with uniform particle distribution and tight oversize control, the MBM1 is a sound choice when surface finish integrity is critical. |
Natural Diamond Mesh
Our line of Natural Diamond mesh products are the material of choice in many grinding applications and electroplated tool products. |
